Epp Composites Pvt. Ltd.

Epp Composites Pvt. Ltd. » Products » Building Products » FRP Manhole Covers

FRP Manhole Covers

FRP Manhole Covers ensure long term durability in every sector due to its construction using thermoset material, which comprises of fiberglass reinforced materials combines with cross-linked polyesters. With these materials, the covers exhibit excellent resistance against wear and tear and ability to sustain heavy load vehicular traffic moving over it. The fiber reinforced plastic used in the manhole cover makes it 40% lighter and 5 times strong in compressive strength than conventional precast concrete and cast iron covers. The material is also resilient in nature, thus, sustain constant exposure to weather or sun without any compromise with the security or aesthetics.


  • Available in custom sizes to suit all needs
  • Contain no metal thus, zero scrap value
  • Comes in light weight, weighs only one seventh of the weight of cast iron cover
  • Available in different granite finishes

  • Underground electrical cabling
  • Inspection chambers for sewerage
  • Water, gas and petroleum installations
  • Telecom cabling
  • Beautification of gardens and landscapes

  • Lighter in weight
  • Easy to handle
  • Can withstand constant exposure to weather or sun
  • Corrosion resistant
  • 100% water proof
  • Fire retardant
  • UV resistant
  • Can withstand heavy vehicular traffic

Available in
  • Load capacities : ranging from 5 Tons to 40 Tons


Separate

FRP Turbo Ventilators

The FRP Turbo Ventilators is installed on the roofs of establishments for boosting the natural up-flow of hot and contaminated air for making the workplace clean and healthy to work in. The rotating heads in the ventilator are powered by cost-free air and this enables its functioning of ventilation. There is a slight motion of air initiated by typhonic ball bearing that further force the turbo head to rotate. A centrifugal force is generated due to free revolving dead creating a vacuum that initiate the function of suction and discharge. The vacuum created is filled by the warm air and rushes into the outside atmosphere, even in low wind conditions.

There is no risk of funneling air back into a building even due to open ends in any position of the ventilator. The engineering and construction of these ventilators ensure robust and trouble-free performance. The bearing system in the ventilator is capable of sustaining thrust loads, depending on its size which can be customized. It is also lubricated for continual services. While designing, utmost attention is paid on the balance and alignment aspect of the ventilator to assure quick and vibration free operation. These ventilators function with spring motion that is efficient, aesthetically and psychologically appealing.

Glass fiber reinforced polyester canopy
We believe in continuous innovation and this has resulted in the production of a new glass fiber reinforced polyester sheet vari-slope roof. In comparison to conventional standard sheet metal base, this is the best as an integral part of the ventilator.


Our range of turbo ventilators is constructed with a number of superior design features to give maximum efficiency

  • Adjust to 0-30 slope
  • Variety of colours
  • A translucent opal base allows 22% natural light
  • Suits all roof corrugations
  • Quick & easy to install
  • Self propelled

  • Factories
  • Schools
  • Public buildings
  • Farm buildings
  • Houses

  • UV stabilized
  • Impact resistant
  • Easily installed to deep rib profiles
  • Lightweight
  • Durable
  • Energy saving


Separate

FRP Skylight Roofs & Domes

We are popular in the entire industry for unique designer FRP Skylight Roofs & Domes. Available with exceptional features all packed in incomparable designs, these roofs and domes offer complete skylight roofing solutions. Designed in various shapes like hemispheres, pyramids, laminar polyhedron and customized shapes, these are the best solution for enhancing the aesthetics of any building.

Fiber Reinforce Plastics are introduced in the roofs and domes as glasses have its own limitation to mould. The FRP roofs and domes are tougher and designer friendly replacement.


  • Available in various shades of translucent, transparent and opaque
  • For designer's delight, it is available in combination with diverse media
  • 20 times tougher than glass
  • Up to 80% of light clarity in different grades

  • Gardens & sitting area
  • Swimming pools
  • Open to sky areas
  • Shopping mall atriums
  • Walkways
  • Parking area

  • Durable quality
  • Weather proof
  • Economical design
  • Easy to fix
  • Light in weight


Separate

FRP Corrugated Roof Sheets

FRP Corrugated Roof Sheets are available in the finest and pleasant colors like natural and white. With the complete assurance of quality statement, these roof sheets perfectly suit your ambiance. The limitation of opacity in these roof sheets can be overcome by the use of asbestos cemented, galvanized or industrial corrugated roof sheets that allow uniformly diffused light.

We, at our end, are fully equipped with all the sophisticated manufacturing facilities that enable us in furnishing large orders at short notice. Along with this, we also make sure to follow tough quality checking standards to assure the best product.



  • Reduce intensity of sun rays
  • Disperse and allow pleasant uniformly diffused light thorough the area
  • Al roof sheets form an excellent protective shield for UV rays, ensuring well maintained temperature in in covered area and covered entities
  • Fiber reinforced plastic makes the roof strong, water resistant and light in weight

  • Factories
  • Warehouses
  • Cold storages
  • Swimming pools
  • Terrace
  • Gardens

  • Chemical resistance
  • Easy to quick to fix
  • Light weight
  • Weather proof
  • UV protection
  • Power saving

Available in
Translucent Light Transmission AC CorrugationSize (in M) Ind CorrugationSize (in M) Flat SheetSize (in M)
87% to 90% at the height of 40ft & above 1.00 x 1.00
1.00 x 1.50
1.00 x 2.00
1.00 x 2.50
1.00 x 3.00
1.00 x 3.65
1.00 x 1.00
1.00 x 1.50
1.00 x 2.00
1.00 x 2.50
1.00 x 3.00
1.00 x 3.65
Customized
   

Dimensions Customized
Material Fiberglass
Surface Treatment Coated, Film Coated


Separate

SMC Doors

With these SMC Doors, your neighbors get several reasons to envy your domicile. The SMC technology incorporated in these doors allow us to bring forth highly attractive designs with high strength and at the same time excellent finish. As compared to conventional wooden and steel doors, EPP doors offer exceptional high definition skins and textures to choose from. In addition to this, we also offer LVL engineered wooden lock block reinforcement in every single door, that ensure better safety than steel and excellent beauty than wood. There is no risk of damage in these doors due to termites, warping and splitting.

SMC represents Sheet Moulding Compound which is widely used as a compound raw material in unsaturated polyester resin, fiberglass, calcium carbonate or aluminum trihydrate filters, thickening agent, catalyst and pigment. The processing is done by putting this sheet material in a steel mould under high temperature and pressure for increasing the molecular strength of finished parts. With each cycle, the strength of the finished product increases, and so its high definition textures, aesthetic vale and astonishing impression.


  • SMC technology
  • High performance specially engineered fiber glass
  • Vast & luxurious range of colours and designs
  • Solid mounting surface for Door accessories
  • Strength of LVL engineered wooden lock blocks reinforcing
  • Durable to guard your entry for years

SMC Doors are obvious choice for domicile ingress i.e.

  • Apartments
  • Villas
  • Residential colonies
  • Construction companies

This is the most cost effective and durable option taking into accounts its aesthetic looks and safety norms for:

  • Hotels
  • Hospitals
  • Schools
  • Colleges

  • Extra strong
  • Easy to fix
  • Fire retardant
  • Weather proof
  • Maintenance free
  • Easy to clean


Separate

RTM Doors

Suiting your elegant interiors and exteriors, we bring forth a new and classic range of RTM Doors that are designer in look. With our strength of technology, these doors are made from the best quality fiber reinforced plastic. Designed with RTM technology, these doors, as compared to other conventional materials like wood, steel and PVC, are more durable and safe. These are offered to clients in the form of ready to fit design with an added advantage of solid mounting surface for door accessories.

RTM represents resin transfer moulding in which resin in injected under pressure into a vacuumed cavity pre lined with resin wet glass fibers. This processing makes the doors extra strong and along with its, PUF encapsulation method makes it light in weight and easy to handle.

Clients have the options of choosing these RTM doors with our without complementing FRP frames that ensure complete protection from termites and warp in addition to a fire-proof environment.


  • Maintenance free
  • Embedded wooden blocks
  • RTM technology
  • Strong, tough, aesthetic, & lightweight

In our range, we have variety of doors in different designs, colours, textures and dimensions for complementing aesthetical design of any style of interiors in:

  • Residences
  • Villas
  • Apartments

These are capable of withstanding rough and heavy use in:

  • School
  • Hospital
  • Colleges

Our well equipped sophisticated and advanced manufacturing unit helps us in accomplishing large orders of:

  • Hotels
  • Hospitals
  • Hostels
  • Construction Projects

  • Fire retardant
  • Easy to transport
  • Easy to fix
  • Chemical resistance
  • Weather proof
  • Economical
  • Durable

Available in
Series Surface Design Standard Sizes Colours
Duro Glossy Flush & 2 Panel 6' x 2.25'
6' x 3'
6.25' x 2.25'
6.5' x 2.25'
6.5' x 3'
6' x 2.5'
6.25' x 2.5'
6.25' x 3'
6.5' x 2.5'
As per the Standard Shade Card
Shine
Duro Teak Wood Grained Flush, 2 Panel & 4 Panel
Duro Veil Veiled Flush, 2 Panel & 4 Panel


Separate

Round FRP Manhole Cover

Today, in the construction sector, the cost of conventional materials like steel, iron PVC and aluminum is increasing day by day, Along with this, these materials have some disadvantages with them such as risk of corrosion that weaken the establishment structure. To overcome these problems, we bring forth a wide range of Building Products; all made from high grade fiber reinforce plastics. For any building project, we have safety products, doors, roofing solutions and ventilators. We also employ highly advanced SMS and RTM technology in our doors to enhance their performance in terms of designing, finishing and strength. We are catering these building products to commercial, industrial and also residential sectors for both safety and aesthetic works.


Separate

Square FRP Manhole Cover

Leveraging the skills of our qualified team of professionals, we are instrumental in manufacturing and supplying a wide range of FRP Manhole Cover. This comes with an anti-skid surface that aids in preventing accidents related to slipping. Further, the fire resistance and thermally insulated finish of this product also provide for lasting usage. Some of the product features include providing installation support at areas of high temperatures, resistant to microbial growth, featuring high strength to weight ratio, impact and UV resistant, single piece molded type construction, available in multiple color choices and others.


  • Available in Custom Sizes to suit all needs
  • Contain no metal thus, Zero Scrap Value
  • Comes in Light Weight (Only one seventh of cast iron cover)
  • Available in different granite Finish

Looking for Product Name ?