Epp Composites Pvt. Ltd.

Epp Composites Pvt. Ltd. » Products » Pultruded Products » FRP Protruded Grating

FRP Protruded Grating

FRP Protruded Grating is composed of 70% glass to 30% resin ratio. As compared to molded grating, these have greater stiffness, allowing spanning over greater distances. Best suited for those constructions where wide support spans, ADA compliance and close load bar is required like in pedestrian walkways and platforms. These gratings are offered in a variety of panel depths, sizes, tie bar spacing and open area.


  • Flooring
  • Trench covers
  • Platforms
  • Walkways
  • Refineries
  • Workboats
  • Access and well-head platforms
  • Offshore industry
  • Transport industry
  • Marine industry

  • Corrosion resistance
  • Fire proof
  • Impact resistance
  • Low smoke and toxic fume emissions
  • Non conductive
  • Strong structure
  • High temperature resistance
  • High strength-to-weight ratio
  • Light weight
  • Easy fabrication
  • Easy to install


Separate

FRP Pultruted Profiles

FRP Pultruded Profiles are available in the form of channels, I-beams, angles, flat strips and notch bars. Strictly tested for mechanical and physical properties, these profiles are well tested before being developed for any project. These are best suitable for those industrial applications that involve environment of alkaline, solvents, acidic and coastal.


  • Industrial grating
  • Cable trays
  • Ladders
  • Solid rods for electrical insulation

  • High tensile strength
  • Excellent flexural strength
  • Low thermal conductivity
  • Good corrosion resistance
  • Provides strength and rigidity
  • Dielectric strength
  • Dimensional stability
  • Microbes and insect proof


Separate

FRP Fiber Ladders

Suitable to use for any construction, repairing and maintenance work, the FRP Fiber Ladders are the best means of reaching locations too high to reach otherwise. Along with assisting workers in going down into excavations and trenches, these ladders also help workers in gaining access to upper floors and roofs of buildings. Used by painters, electricians, plumbers and masons, these fiber ladders are completely protected with electrical insulation. This ladder is designed with two side rails joined with steps of cross pieces at regular intervals.


  • Painting work
  • Installation of electricity boards
  • Telecom industries
  • High tension line maintenance
  • Railways

  • Electrically insulating
  • Light weight
  • Corrosion resistance
  • Heavy duty
  • Strong and sturdy
  • Twist proof
  • High mechanical strength
  • Serrated antiskid fiberglass steps

Available in
  • Wall support type single section FRP / GRP fiberglass ladder : 2m to 6m
  • Wall support type extension FRP / GRP fiberglass ladder : up to 12m
  • Self supporting A - type FRP / GRP ladder : 5ft to 18ft
  • Material : FRP Pultruded Sections with Polyester Grade Resin, Aluminum Section for Steps
  • Design Standard : ASTM D 3917-96, ANSI-ASC-A14.5, OSHA


Separate

Industrial Railings

Industrial Railings are the critical piece of safety, used in all industries for the protection of workers. Made of premium quality pultruded FRP sections, these railings are heavy duty in nature and thus, do not bend or break easily. This makes our construction extremely durable and reliable. Well-suited to corrosive environment such as in industries of chemical, wastewater treatment plants and petroleum, the railing systems are meet all the industry standards of safety.


  • Transformer buildings
  • Thermal power plants
  • Oil & gas platforms
  • Petroleum refining access platforms
  • Electrical substations

  • Suitable for very large areas
  • Quick installation
  • No specific fixing systems are needed for erecting
  • Non conductive
  • Fire retardant
  • Meet OSHA standards
  • Maintenance free
  • Pilfer proof


Separate

FRP Moulded Grating

FRP Moulded Grating is composed of 60% glass to 40% resin ratio. Best suited for those constructions where wide support spans, ADA compliance and close load bar is required like in pedestrian walkways and platforms. These gratings are offered in a variety of panel depths, sizes, tie bar spacing and open area.


Separate

FRP Gratings

We are manufacturing FRP Grating by molding process which offers Unmatched resistance against corrosion, impact resistance and UV protection. FRP grating provides excellent corrosion resistance with strength, safety, and longer service where conventional steel gratings rapidly corrode in chemical environment. Due to light weight in comparison with steel FRP gratings are very easy to install.

We are fabricating and molding the items as per customer’s specifications and requirement. We can offer new products to customer’s satisfaction by maintaining the special requirement of physical and mechanical properties, chemical resistance and dimensional tolerances. We are manufacturing machine covers, wind mill tips, electric pole, etc. as per customer’s requirement.


  • Flooring
  • Trench Covers
  • Platforms
  • Walkways

  • Corrosion resistant and fire retardant
  • Impact Resistance
  • Non conductive
  • Strong and Light weight
  • Easy to Install

  • Material: FRP
  • Width: Up to 2m
  • Length: Up to 7m


Separate

Fiberglass Tanks

EPP engineers and manufactures Fiberglass Tanks in a wide range of shapes, sizes and configurations. While the majority of these tanks are cylindrical, EPP can supply rectangular or other custom shapes to meet the exacting demands of our customers. We have considered industries and their particular requirements, providing outstanding quality and tenure.


Looking for Product Name ?